System information

Chapter 1 Edit Configuration Mode RADview-PC/TDM Megaplex-2100/2104 User’s Manual
1-8 System Level Configuration Operations
Parameter Possible Values / Remarks
Slot The slot containing the card on which the fallback clock is located. This parameter
is enabled only when the fallback clock source type is Rx Clock.
Empty slots are not selectable
IO-1
..IO-12
For MP-2104: IO-1
..IO-5.
Port The port through which the fallback clock signal is received by the Megaplex.
external-1
..external-12
For an HS-Q/M card, only external-1 is available
When Type is Adaptive: Bundle1..Bundle120
Note: To avoid future sanity check errors, select only existing bundles, or one that is
going to be created
Displaying System Information
The System Info command displays physical information about the current
Megaplex.

To display system information:
1. From the Configuration menu, select System Info...
The System Information dialog box appears.
2. Select value for Voice Level Offset (Offset 1 or No Offset) and click <Set>.