System information

RADview-PC/TDM Megaplex-2100/2104 User’s Manual Chapter 1 Edit Configuration Mode

System Level Configuration Operations 1-9

Voice Level Offset is valid only for SW versions

≥

6.30.

The Voice Level Offset affects the displayed value of Tx and Rx levels (voice cards

only) by adding or subtracting a constant value. The offset varies depending on the

port.

The following values are added when Offset 1 is selected:

For 2WIRE PORTS:

Tx Level: The base value (for 0dBm) =0

Rx Level: The base value (for 0dBm) =–2

For 4WIRE PORTS:

Tx Level: The base value (for 0dBm) =–16

Rx Level: The base value (for 0dBm) =7

Figure 1-6. System Information Dialog Box

Modifying the Configuration List



To view the list of Megaplex configurations:

• From the Configuration menu, select Select Config…

The Select Config dialog box appears.

A maximum number of 10 configurations can be stored.

Figure 1-7. Select Configuration Dialog Box

Note