System information

RADview-PC/TDM Megaplex-2100/2104 User’s Manual Chapter 1 Edit Configuration Mode
System Level Configuration Operations 1-11
If Current configuration is selected to copy:
NMS copies the current Edit Configuration to the Muxes and Configuration
selected.
If the cards in the copied configuration are different from the original cards in the
destination Muxes, the new set of cards will be copied to the destination
configuration. All the other existing configurations of the destination Mux will
change their set of cards accordingly. Slots containing unchanged card types, will
remain unchanged. Slots containing new card types, will contain default values.
If the Configuration ID already exists in the destination Mux, the copied
Configuration replaces the existing one.
If the Configuration ID does not exist in the destination Mux, NMS adds the new
Configuration to the list of the existing configurations, with its attached description.
The Destination Mux, its Card Windows and all Dialog Boxes will close when the
Copying operation is performed.
The Flip DB tables are not copied.
Figure 1-8. Mux Copy Dialog Box
Table 1-4. Mux Copy Parameters
Parameter Possible Values / Remarks
Destination Mux A list of the existing Megaplexes, including the current one.
For MP2100 - only MP2100 Megaplex types will be selectable.
For MP2104 - only MP2104 Megaplex types will be selectable.
You can select more than one Megaplex as the destination. The Configuration ID is
the same for all if only the present configuration is copied.
Copy Configurations All existing Edit Configurations or only the Current Edit Configuration can be
copied.
Note