System information

Chapter 1 Edit Configuration Mode RADview-PC/TDM Megaplex-2100/2104 User’s Manual
1-12 System Level Configuration Operations
Configuration Id The destination configuration ID. If the destination configuration ID exists, the copy
operation will overwrite it. The default Configuration ID is the same as the current
Edit Configuration.
Note: The current configuration cannot also be the destination configuration.
Description A brief description of the destination configuration.
Reading the Agent Configuration
The Read command uploads the current Agent configuration to the Edit
Configuration mode. This command is only available when there is
communication with the agent.

To upload the configuration from the agent:
1. From the Configuration menu, select Read...
The Read Config dialog box appears (Figure 1-9).
2. Select the desired configuration by clicking on it.
3. Click <Apply>.
Apply causes the selected configuration to be uploaded automatically. No user
confirmation is requested.
Figure 1-9. Read Config Dialog Box
Table 1-5. Read Configuration Parameters
Parameter Possible Values / Remarks
ID
Configuration ID number of agent configuration in the RADview database. The current
Agent Configuration is marked by [ ] surrounding the Cfg Id number.
Description
Brief description of each agent configuration in the RADview database
Note