System information

RADview-PC/TDM Megaplex-2100/2104 User’s Manual Chapter 1 Edit Configuration Mode
System Level Configuration Operations 1-13
Date
Date of the last update of each configuration
Time
Time of the last update of each configuration
By
IP address of the manager that performed the last update of each configuration
Display
Selected configuration entry from the Read Config list
Updating the Configuration to the Agent
The Update command downloads a specific Edit Configuration to the Megaplex
CL-2, or CL-2 ETH card.

To download a specific Edit Configuration to the agent:
1. From the Configuration menu, select Update…
The Update Config dialog box appears.
2. Select the desired Configuration Id.
3. Click <Set> to download the selected configuration to the Megaplex.
Figure 1-10. Update Config Dialog Box
Table 1-6. Update Config Parameters
Parameter Possible Values / Remarks
Configuration ID Configuration ID number of Edit Configuration that you want to download to the
Megaplex
Description Brief description of the selected Edit Configuration
Performing Flip DB
The Flip DB command opens a submenu that includes commands for defining
parameters for flipping configurations, saving the Flip configuration to the
Megaplex (activating), and reading the Flip configuration to the Edit Configuration
(uploading).