System information

RADview-PC/TDM Megaplex-2100/2104 User’s Manual Chapter 1 Edit Configuration Mode

System Level Configuration Operations 1-19

Figure 1-17. Decision Table’s Net Event List

Updating (downloading) the Flip DB to the Megaplex

The Flip DB>Update command saves (downloads) the information in the

Agenda, Net Events and Decision Table to the Megaplex.

This option is only available when there is communication with the Megaplex.



To update the Flip DB to the Megaplex:

1. From the Configuration menu, select Flip DB followed by Update.

A confirmation message appears.

2. Click <OK> to confirm Update operation.

The Flip configuration is saved in the Megaplex CL card.

If the sanity check detects errors, RADview aborts the Update Flip DB

process.

Reading (Uploading) the Flip DB to the Edit Configuration

The Flip DB>Read command reads (uploads) the Flip configuration from the

Megaplex agent’s mode in the database to the Edit Flip Configuration.

This option is only available when there is communication with the Megaplex.



To upload the Flip DB to the Edit Flip Configuration:

1. From the Configuration menu, select Flip DB followed by Read.

A confirmation message appears.

2. Click <OK> to confirm Read operation.

The Flip configuration in the Megaplex CL card replaces the existing Edit

Flip configuration.

Note