System information

Chapter 1 Edit Configuration Mode RADview-PC/TDM Megaplex-2100/2104 User’s Manual
1-26 System Level Configuration Operations
Parameter Possible Values / Remarks
Regret Duration (sec) Regret duration
14
..120
Seize Detect (msec) Minimum duration to detect a valid seizure
24..448
Seize Ack. Delay (msec) Delay before sending a valid seize ack signal
8
..304
Clear-Back Detect
(msec)
Minimum duration to recognize a valid clear-back
24
..448
Clear-Forward Detect
(msec)
Minimum duration to recognize a valid clear-forward
200..504
Fault Detect (msec) Minimum duration to recognize a block signal
16..104
Fault Removal Detect
(msec)
Minimum duration to recognize a valid block removal signal
16..104
Meter Pulse Duration
(msec)
Duration of metering pulse to be sent
120..304
Seize Ack. Wait (msec) Minimum duration to receive seizure acknowledge signal
104..1200
Seize Ack. Detect
(msec)
Minimum duration to recognize a valid seizure acknowledge signal
48
..600
Answer Detect (msec) Minimum duration to recognize a valid answer signal
64..448
Block Removal Detect
(msec)
Minimum duration to recognize a valid block removal signal
16
..96
Metering Pulse Detect
(msec)
Minimum duration of incoming meter pulse
64..448
Forced Disconnect
Detect (msec)
Minimum duration to recognize disconnect signal
304..448
Disconnect Ack. Detect
(msec)
Minimum duration to recognize disconnect acknowledge signal
304..448
Release Guard T1
(msec)
Minimum duration to release guard. During this time, no new call can be initiated
16..2000
TS Data Tab
TS TS Index
1..31
Call Enable Indicates the Enabled Call direction for the specific TS
Both
, Incoming, Outgoing
Metering Indicates if the specific TS supports Metering
Yes, No