System information

RADview-PC/TDM Megaplex-2100/2104 User’s Manual Chapter 1 Edit Configuration Mode
System Level Configuration Operations 1-29
3. Configure Copy to Link and Copy to Variant.
4. Click <Set>.
Figure 1-29. Copy Variant Dialog Box
Defining V5.1 Variant Data

To define V5.1 variant data in the NMS database:
1. Select the desired variant in the V5.1 Variants Dialog Box (Figure 1-26) click
<Var. Data…>.
The Variant Data dialog box appears (Figure 1-30).
2. Configure desired parameters and click <Set>.
Figure 1-30. Variant Data Dialog Box

To change Variant TS values:
1. In the Variant Data dialog box, select desired variant and click <Change…>.
The Change Variant Data dialog box appears displaying two tabs.
2. For each tab, change desired parameters and click <OK>.