System information

RADview-PC/TDM Megaplex-2100/2104 User’s Manual Chapter 1 Edit Configuration Mode
System Level Configuration Operations 1-35
Configuring Bundles
Bundles defined as Redundant in the Redundancy Table will not always have the
same Dest Name and Dest Bundle. If you use the redundancy feature as Broadcast,
the destinations will be different.
When both redundant bundles are related to the same Time Slots (for a specific
port), only one appears in the Bundles dialog box. A Time slot can be assigned to
only one bundle.

To view the bundle connection table:
• From the Configuration menu, select Bundle Connection Table…
The Bundle Connection Table appears.
Figure 1-36. Bundle Connection Table
Table 1-16. Bundle Connection Parameters
Parameter Possible Values/Remarks
IO Slot / Int–n Slot or Int-n to be configured
for Slots: 1–1..12
for Int–n: 1..12–2
Bundle No.
1–120
Bundle Name Bundle name for selected channel. Table will display one bundle name per line
Admin Status Connected,
Disconnected (frames will not be sent from this channel)
Dest. Name Logical name or IP address of the destination mux
Next Hop Indicates IP address to which the Ehternet frame will be sent when the Dest.
Name IP is not in the device subnet
Dest. Bundle Bundle number in the destination mux
1–2016
Rdn Bundle NA, Number of redundant bundle
Exit Port External–1, External–2, Auto
Note