System information

Chapter 1 Edit Configuration Mode RADview-PC/TDM Megaplex-2100/2104 User’s Manual
1-36 System Level Configuration Operations

To add an entry in the Bundle Connection Table:
1. In the Bundle Connection Table, click <Add...>.
The Add Bundle dialog box appears.
2. Enter the required changes.
3. Click <Apply> to add the new entry to the bottom of list in the Bundle
Connection Table.
Figure 1-37. Add Bundle Dialog Box
Table 1-17. Add Bundle Connection Parameters
Parameter Possible Values/Remarks
Bundle No.
1–120
Bundle Name Bundle name for selected channel. Table will display one bundle name per line
Note: Bundle name should be unique
Admin Status Connected,
Disconnected (frames will not be sent from this channel)
Dest. Name Logical name or IP address of the destination mux