System information

RADview-PC/TDM Megaplex-2100/2104 User’s Manual Chapter 1 Edit Configuration Mode
System Level Configuration Operations 1-41
Figure 1-42. Sanity Check Error List
Table 1-19. Sanity Check Error Parameters
Parameter Possible Values / Remarks
Slot Slot in which the error was detected.
Card Type Type of card in which the error was detected.
Port Port in which the error was detected.
TS Time Slot in which the error was detected.
Description Brief description of the error.
[Save File…] Click Save File… to save the Sanity Check Errors List in a file. The Save dialog box
appears with the default output file name output.txt. This file name can be changed, if
desired. Enter path and filename and Click <OK>.
Displaying the Agent View
If the Edit Configuration only is displayed on the screen, you may also display the
Agent view. This command is only available when there is communication with the
Megaplex.

To display the Agent view of the application window:
• From the Window menu, select Agent View followed by On.
The actual agent configuration appears below the Edit Configuration view.