System information

Chapter 1 Edit Configuration Mode RADview-PC/TDM Megaplex-2100/2104 User’s Manual
1-48 Card Level Configuration Operations
Copying a Card's Configuration
The Copy command allows you to copy the selected card's configuration to a
destination slot within the current Megaplex or to another Megaplex in the net.

To copy a card configuration to another slot:
1. In the Edit Configuration mode, click the card whose configuration you want
to copy.
2. From the Configuration menu, select Copy...
The Card Copy dialog box appears.
3. Select the required copy parameters and click <Set>. The source
configuration is copied to its destination(s).
If the destination slot was previously empty, the new card type and its
default values will be added to that slot in all existing Edit Configurations
on the destination Megaplex.
Figure 1-46. Copy Card Dialog Box
Table 1-23. Card Copy Parameters
Parameter Possible Values / Remarks
Source Slot Slot in which the selected card is inserted
Card Type Type of the selected card
Node Name List of Megaplexes in the current node.
If the current Megaplex is MP-2100 or MP-2104, you can select only MP-2100 or
MP-2104 as a destination