System information

RADview-PC/TDM Megaplex-2100/2104 User’s Manual Chapter 1 Edit Configuration Mode
Port Level Configuration Operations 1-49
Parameter Possible Values / Remarks
Configuration Id ID number of an existing Edit Configuration in the destination Megaplex
Destination Slot Destination slot in the destination Megaplex. Only empty slots or slots containing the
same card type as the source card are available.
Note: You can select more than one destination slot by using standard Windows item
selection methods (click<CTRL>click, click<SHIFT>click). Each destination slot will
receive the same configuration.
A destination slot may contain data that affects or depends on data of other slots (for
example, redundant MTML cards, LS-6 tandem cards, and so on). These conditions are
not checked or processed further by RADview. You are responsible for checking and
correcting such conditions.
Removing a Card
The Remove command deletes a card configuration from the selected slot in the
Edit Configuration mode. If the card configuration exists in the same slot in other
Edit Configurations of the current Megaplex, the card configuration will be
removed from all.

To remove a card from the Edit Configuration:
1. Click the card you want to remove.
2. From the Configuration menu, select Remove.
A dialog box appears asking you to confirm the Remove operation.
3. Click <OK> to confirm.
1.5 Port Level Configuration Operations
RADview allows you to perform network management in the Port Level. You select
a port by clicking it in the zoomed card view.
Table 1-24 lists the different management options for port level.
Port Level Configuration menu options are dependent upon the selected port.
The contents of the Configuration menu of the zoomed card depend on the port
selection:
If the selected port is serial, voice, TDM-IO, etc., only the Port Info and Copy
options are available (not applicable for MTML).
If the selected port is TDM-ML (external-1 port of MTML), the Port Info..., Copy, TS
Assignment and User Name options are available.
Note