System information

Chapter 1 Edit Configuration Mode RADview-PC/TDM Megaplex-2100/2104 User’s Manual
1-50 Port Level Configuration Operations
Table 1-24. Port Level Management Options
Tasks –
Configuration
Dialog Box and
Parameter Location
Path
Setting port
information
Software Configuration
dialog box
(Figure 1-47)
Configuration
Port Info…
Setting User
Name and
Information
Port User Info dialog box
(Figure 1-56)
Configuration
User Info…
Configuring
Bundles
Bundles Dialog Box
(Figure 1-52)
Configuration
Bundles…
Setting Time
Slots
Time Slots table (Figure 1-
57)
Configuration
TS Assignment…
Setting Port Information
The Port Info command displays software configuration information about the
selected port.

To display information about a port:
• In the Card View, double click the port. Alternatively, in Card View select the
port and from the Configuration menu, select Port Info or click the
Port Info button
.
The Port Information dialog box appears.
General information and software configuration information can be displayed by
selecting the various tabs. RADview supports several types of cards.
The Port Information dialog box contains the following read-only parameters at the
top: Slot, Port and Card Type.
Configuring Port Information Parameters
Main Link Cards
ML (Main Link) cards work in conjunction with common logic cards.
ML-1 cards (MTML-1/T1 DSU, MTML-1/T1 CSU, MTML-F/T1, MTML-1/E1 DSU,
MTML-1/E1 LTU, MTML-F/E1) work with CL-1 (CL-1, CL-1 ETH) cards and are
supported by Megaplex software versions 6.09 and below.
ML-2 cards (MTML-2/T1, MTML-2/E1) work with CL-2 (CL-2, CL-2 ETH) cards and
are supported by Megaplex software versions
≥ 6.30.
Note