System information

RADview-PC/TDM Megaplex-2100/2104 User’s Manual Chapter 1 Edit Configuration Mode
Port Level Configuration Operations 1-57
Parameter Possible Values / Remarks
Recovery Time
(sec)
Minimum interval in seconds necessary to pass from time MTML card is switched (to
current slot) before next ML switch can occur:
1..99
Connect Tab
Table 1-32. ML Rdn. Tab MTML2/E1
Parameter Possible Values / Remarks
Mediation Enables time slot connection within the current Megaplex or to another Megaplex in the
net
Direct (Full) - Time slot connection within the current Megaplex
Fractional - Time slot connection to another Megaplex in the net.
Connection
The connection group parameters are enabled only when Mediation=Direct
Connect Type Type of connection
TDM Service, TDM User
Connect Mux Megaplex in the net which is connected to the selected port
Connect Slot Slot in the connected Megaplex that is connected to the selected port
Connect Port Port in the connected Megaplex that is connected to the selected port
MTML-2/E1 V5.1 Parameters

To configure V.51 data parameters for an MTML-2/E1 external port:
1. In the Card View, click the required port.
2. From the Configuration menu, select Port Info...
The Port Information dialog box appears (Figure 1-49).
3. Click the V5.1 tab.