System information

RADview-PC/TDM Megaplex-2100/2104 User’s Manual Chapter 1 Edit Configuration Mode
Port Level Configuration Operations 1-69
Table 1-38. Port Copy Parameters
Parameter Possible Values / Remarks
Source Slot Slot in which the selected card is inserted
Source Port Number of the selected port
Card Type Type of the selected card
Node Name List of Megaplexes in the current net. You can select any type of Megaplex as a
destination
Configuration Id ID number of an existing Edit Configuration in the destination Megaplex
Destination Slot Destination slot in the destination Megaplex. Only slots containing the same card type as
the source card are available.
Note: You can select more than one destination slot. Each destination slot will receive the
same configuration.
Destination Port Destination port in the destination slot
Note: A destination port may contain data that affects or depends on data of other ports
(for example, redundant MTML cards, LS-6 tandem cards, and so on). These conditions
are not by checked or processed further by RADview. The user is responsible for checking
and correcting such situations.
Setting User Info
The User Info command enables the user to assign user information for a port.

To change port information parameters:
• In the Card View, select a port and from the Configuration menu, select User
Info…
The Port User Info dialog box appears.
Figure 1-56. Port User Info Dialog Box