System information

Chapter 1 Edit Configuration Mode RADview-PC/TDM Megaplex-2100/2104 User’s Manual
1-70 Port Level Configuration Operations
Table 1-39. Port User Info Parameters
Parameter Possible Values / Remarks
Slot Slot in which the card is located
Port Selected port
Card Type Card type
User Name User supplied name whose maximum length is 15 characters
User Info User supplied information whose maximum length is 70 characters
Setting Time-Slot Assignments
Use the TS Assignment command to display and set time slot assignments for a
specific port.
1. TS Assignment is only available for external ports of MTML cards.
2. HSH cards can be connected only to MTML or ML-IP cards.
3. Since HSH cards can only be connected to MTML cards they are not considered
ML cards. Therefore, their slot will not be selected for the Link to Slot field.
4. If the internal port of an HSH card is selected, the Slot field only shows slots
that contain ML cards. The Split option is NOT selectable.

To set time-slot assignments
1. In the Edit Configuration Card View, click the required external-1 port.
2. From the Configuration menu, select TS Assignment or click the
TS Assignment button
The Time Slots Table appears.
Notes