System information

RADview-PC/TDM Megaplex-2100/2104 User’s Manual Chapter 1 Edit Configuration Mode
Port Level Configuration Operations 1-73
Parameter Possible Values / Remarks
Port Destination port in the destination slot. Options depend on the available ports on
the installed IO card
None, NA, external-1..external-12, Internal-1..Internal-13
Time Slot Destination time slot for the selected time slot in the current Megaplex. This
parameter is relevant if the destination slot contains an MTML card.
Assigned time slots are checked during sanity checks.
T1 link - None, 1..24
E1 link - None, 1..31
Direction NA, Tx, Rx, Both, BcastSrc, BcastDst
TS Type NC, Data, Voice, Mng

To add another destination for a TS Source or Bit:
• In the Time Slots Table, select an existing TS entry and click Add...
The Add TS dialog box appears.
Figure 1-59. Add TS Dialog Box
Table 1-42. Add TS Parameters
Parameter Possible Values / Remarks
TS Src Index number of the selected time slot. This parameter is read-only.
T1 link: 1..24
E1 link: 1..31
Slot Destination card slot in the current MP-2100. Options depend on the type of the
selected port.
None, IO-1..IO-12, Split
Port Destination port in the destination slot. Options depend on the available ports on
the installed IO card.
None, NA, external-1..external-12, Internal-1..Internal-13