System information

Chapter 1 Edit Configuration Mode RADview-PC/TDM Megaplex-2100/2104 User’s Manual
1-74 Port Level Configuration Operations
Parameter Possible Values / Remarks
Time Slot Destination time slot for the selected time slot in the current Megaplex. This
parameter is relevant if the destination slot contains an MTML card.
Assigned time slots are checked during sanity checks.
T1 link - None, 1..24
E1 link – None, 1..31
Direction NA, Tx, Rx, Both, BcastSrc, BcastDst
TS Type NC, Data, Voice, Mng

To Remove a TS
• In the Time Slots Table, select an existing TS assignment and click
<Remove>.
The TS is removed from the list.
Connecting a Sequence of Time Slots
You can assign a sequence of consecutive time slots from the selected card to a
port on another MTML card of the same type (T1/E1). This enables you to save the
time otherwise required to assign each time slot separately.

To assign a sequence of time slots
• In the Time Slots Table, click Sequence.
The Sequence TS Assignment dialog box appears.
Figure 1-60. Sequence Time Slot Assignment Dialog Box