System information

Chapter 2 Agent Configuration Mode RADview-PC/TDM Megaplex-2100/2104 User’s Manual
Table 2-2. Mux Information Parameters
Parameter Possible Values / Remarks
Type The type of Megaplex: MP-2100, MP-2104
Master Clock
Source Type Main source for Megaplex timing
Internal, Rx Clock, Adaptive.
Source Slot The slot containing the card on which the master clock is located. This parameter is
applicable only when the master clock source type is Rx Clock.
IO-1 to IO-12
Empty slots are not selectable.
For MP-2104: IO-1 to IO-5.
Source Port The port through which the master clock signal is received by the Megaplex.
external-1 to external-12.
For an HS-Q/M card, only external-1 is available
When Type is Adaptive: Bundle1..Bundle120
Fallback Clock
Source Type Alternate source for the Megaplex timing, to be used in case the master clock fails:
Internal, Rx Clock, Adaptive
Source Slot The slot containing the card on which the fallback clock is located. This parameter is
enabled only when the fallback clock source type is Rx Clock.
IO-1 to IO-12
Empty slots are not selectable
For MP-2104: IO-1 to IO-5
Source Port The port through which the fallback clock signal is received by the Megaplex
external-1 to external-12
For an HS-Q/M card: external-1
When Type is Adaptive: Bundle1..Bundle120
Displaying System Information
The System Info command displays physical information about the current
Megaplex.

To display system information:
1. From the Configuration menu, select System Info...
The System Information dialog box appears.
2. You may update Name, Contact and Location.
3. Select value for Voice Level Offset and click <Set>.
2-6 System Level Agent Operations