System information

RADview-PC/TDM Megaplex-2100/2104 User’s Manual Chapter 2 Agent Configuration Mode
Table 2-4. Date & Time Parameters
Parameter Possible Values / Remarks
Format European format (DD-MM-YYYY), American format (MM-DD-YYYY) or (YYYY-MM-DD)
where DD = day, MM = month and YYYY = year
Month Month according to the Megaplex's real-time clock
Day Day according to the Megaplex's real-time clock
Year Year according to the Megaplex's real-time clock
Time Time according to the Megaplex's real-time clock
Setting the Default Configuration
The Default Config command allows you to select one of the Megaplex's saved
configurations as the default configuration. If automatic Flip DB is not activated,
this default configuration is the Megaplex's current configuration.

To select the Default Configuration:
1. From the Configuration menu, select Default Config…
The Default Config dialog box appears.
2. Click the entry describing the configuration that you want to set as the default.
3. Click <Set>.
A message stating, “For activation, select [E] Configuration> Flip DB>
Update” appears.
4. Click <OK> to confirm.
The selected default configuration is stored in the Megaplex's temporary
configuration until you perform the Flip DB>Update operation. If automatic Flip
DB is not activated, this default configuration is the Megaplex's current
configuration.
Figure 2-6. Default Config Dialog Box
System Level Agent Operations 2-9