System information

Chapter 2 Agent Configuration Mode RADview-PC/TDM Megaplex-2100/2104 User’s Manual
Table 2-5. Default Config Parameters
Parameter Possible Values / Remarks
Id Index number of a Megaplex configuration. The current default configuration number is
surrounded by [ ]
Description Description of the configuration ID as typed during the last update procedure
Date Date of the configuration's last update according to the agent's real-time clock
Time Time of the configuration's last update according to the agent's real-time clock
By IP address of the manager who last updated this configuration
Deleting an Agent Configuration
The Delete Config command allows you to delete a configuration from the
Megaplex Agent Mode’s MTCL card. This command is not available for a
configuration that either appears in the Flip DB Decision Table or is the default
configuration.

To delete an agent configuration:
1. From the Configuration menu, select Delete Configuration…
The Delete Config dialog box appears displaying a list of saved Megaplex
configurations that do not appear in the Flip DB Decision Table or are not
the current default configuration.
2. Click the entry describing the configuration that you want to delete.
3. Click <Set>.
The system requires confirmation of the delete.
4. Click <OK> to confirm.
The selected configuration is deleted from the Megaplex's MTCL-2 card.
Figure 2-7. Delete Config Dialog Box
2-10 System Level Agent Operations