Specifications

Installation and Operation Manual Appendix A Pinouts
Optimux-106 Ver. 6.1 Control Connector A-3
Alarm Cable
Figure A-2. Alarm Cable - CBL-RJ45-DB9/F
Table
A-2 Alarm Cable Pin Assignment
RJ-45 DB-9
1 1
2 6
3 2
4 4
5 9
6 5
A.4 Control Connector
The optional Optimux-106 supervisory port has a standard RS-232 DTE interface.
The physical interface is a Mini-USB connector, designated CONTROL. The
following table lists the pinout for this connector.
Table A-3. CONTROL Mini-USB Connector Pin Assignment
Pin Designation Function Direction
1 – CAP to GND –
3 RX Receive Input
2 TX Transmit Output
5 GND Ground –
4 RS-232 Enable – Input