Specifications

Installation and Operation Manual Chapter 4 Configuration
Optimux-106 Ver. 6.1 Configuring Optimux-106 for Management 4-3
Setting up the Manager List
By default, any remote management terminal is allowed to change the
configuration of the Optimux-106. You may enhance the security of the site by
limiting remote management to specific management terminals or nodes. The
Manager List lists the network nodes from which management may take place.
Optimux-106
Configuration>System>Management>Managers List
Num IP Address Trap
1 (0.0.0.0) Unmasked
2 (0.0.0.0) Unmasked
3 (0.0.0.0) Unmasked
4 (0.0.0.0) Unmasked
5 (0.0.0.0) Unmasked
6 (0.0.0.0) Unmasked
7 (0.0.0.0) Unmasked
8 (0.0.0.0) Unmasked
9 (0.0.0.0) Unmasked
10 (0.0.0.0) Unmasked
1. Change Cell ... (0.0.0.0)
>
ESC-Previous menu; !-Main Menu; &-Exit; ?-Help
Figure 4-3. Managers List Screen
³ To define the managers list:
1. The list contains 10 entries. Press D to move down the list; press U to move up
the list. Press L to select the previous field; press R to select the next field.
2. To change the value of a field, select the field (it will appear highlighted),
then choose Change Cell and then enter the new value. When the Trap field is
set to Unmasked, a trap is sent to this agent.
Setting the Management Access
Management of the unit can be done via several types of access. Each access type
can be available to all users, only users defined in the manager list, or blocked.
Optimux-106
Configuration>System>Management>Management Access
1. User Access >
2. Telnet > (All)
3. WEB > (All)
4. SNMP > (All)
>
Please select item <1 to 4>
ESC-Previous menu; !-Main Menu; &-Exit
Figure 4-4. Manager Access Screen