Specifications

Installation and Operation Manual Chapter 4 Configuration
Optimux-106 Ver. 6.1 Configuring Optimux-106 for Operation 4-7
Optimux-106
Configuration>Physical Layer
1. Ethernet >
2. Link >
3. T1 >
>
Please select item <1 to 3>
ESC-prev. menu; !-main menu; &-exit 1 user(s)
Figure 4-9. Physical Layer Menu
2. From the Physical Layer menu select Ethernet.
The Ethernet menu is displayed.
The Ethernet menu may display the configuration for either ETH-MNG or ETH-USER
depending on the Port Number selected. To toggle between configurations, select
Port Number and the Port Number Menu appears (
Figure 4-11 ).
Optimux-106
Main Menu>Configuration>Physical Layer>Ethernet
1. Device number > (Local)
2. Port number > (MNG-ETH)
3. Port name …()
4. Auto Negotiation > (Enabled)
5. Flow Control > (Enabled)
6. Alarms > (Unmasked)
>
Please select item <1 to 6>
ESC-Previous menu; !-Main Menu; &-Exit 1 User(s)
Figure 4-10. Ethernet Menu
Table
4-6. Ethernet Management Parameters
Parameter Possible Value
(default value in
bold)
Description
Device Number Local
Remote
Identifies the device Location
Port number MNG-ETH
USER-ETH
Opens menu for the MNG-ETH port
Opens menu for the USER-ETH port
Port name String up to 15
characters
A name easily Identifies the Ethernet port
Auto Negotiation Enabled
Disabled
Enables auto-negotiation.
Flow Control Enabled
Disabled
Enables flow control.