Specifications

Chapter 4 Configuration Installation and Operation Manual
4-10 Configuring Optimux-106 for Operation Optimux-106 Ver. 6.1
Table 4-8. Ethernet USER Fault Propagation
Parameter Possible Value
(default value in
bold)
Description
Fault Propagation On
Off
Activate Fault Propagation functionality:
• When signal loss or sync loss is
detected on the uplink, the USER
Ethernet port on both (local and
remote products) is shut down.
• When the USER Ethernet port detects
that the link is down, it automaticaly
shuts down the USER ethernet port on
the remote product.
Deactivate the Fault propagation
functionality
Configuring T1 Channel Parameters
The following menu is used to configure the T1 ports.
Optimux-106
Main Menu>Configuration>Physical Layer>T1
1. Device Number > (Local)
2. Port number > (1)
3. Port Name ... ()
4. Line Code > (B8ZS)
5. Line Length (ft) > (0-133)
6. Alarms > (Unmasked)
>
Please select item <1 to 6>
ESC-Previous menu; !-Main Menu; &-Exit 1 User(s)
Figure 4-14. T1 Configuration Screen
Table
4-9. T1 Channel Parameters
Parameter Possible Value Description
Device Number Local
Remote
Identifies whether parameters shown are
for the local or remote device.
Port number 1 to 4 Identifies the T1 port to configure.
Port Name String of up to 15
characters
Default:
A name to easily identify this T1 port.
Line code B8ZS
AMI
Identifies the T1 Line coding