Specifications

Installation and Operation Manual Chapter 5 Monitoring and Diagnostics
Optimux-106 Ver. 6.1 Monitoring Performance 5-5
3. Select ETH-USER port (2).
The USER-ETH screen is displayed.
Monitoring>Physical Layer>Ethernet
1. Port number > (USER-ETH)
Administrative status > (Up)
Operation > (Up)
Auto negotiation Status > (Completed)
Speed & Duplex > (100Mbps Full Duplex)
Alarm > (Unmasked)
Please select item <1 to 1>
ESC-Previous menu; !-Main Menu; &-Exit
Figure 5-5. USER-ETH Status Screen
Table
5-4. USER-ETH Status Parameters
Parameter Possible Values Description
Administrative status Port Status Indicates the port status
Operation Up
Down
Indicates the current
operational status of the
device.
Autonegotiation Status Completed Indicates the current status of
autonegotiation.
Speed & Duplex 100Mbps Full Duplex
100Mbps Half Duplex
10Mbps Full Duplex
10Mbps Half Duplex
Indicates the speed and
duplexity configured for the
Ethernet port.
Alarm Masked
Unmasked
Identifies whether alarms on
the device are masked or not.
When masked, Ethernet alarms
are not trapped.