Specifications

Chapter 7 Configuring a Typical Application Installation and Operation Manual

7-2 Configuring the System Parameters Optimux-108 Ver. 6.1

³ To enter user name and password:

1. Type in you user name.

Enter su or SU for full configuration and monitoring access.

2. Type in your password at the > prompt (up to eight characters).

Optimux-108 responds to your entry with asterisks.

The default password is 1234.

3. Press <Enter>.

The Main menu is displayed.

7.2 Configuring the System Parameters

³ To configure the Optimux-108 system parameters:

1. Configure the MNG Ethernet port (Main Menu>Configuration>Physical Layer>

Ethernet).

2. Configure the channel type for each of the E1 ports (Main Menu>

Configuration>Physical Layer>E1).

3. Configure the Uplinks (Main Menu>Configuration>Physical Layer>Link).

4. Configure the V.35 port (one side to Internal and the other side to LBT)

(Main Menu>Configuration>Physical Layer>V.35).

5. Configure the Masking of the System alarms (Configuration>System>Alarms).

6. Configure the Masking of the Physical Layer parameters independently for

each parameter: MNG-ETH, E1, Link, V.35 (the paths of these parameters

appear in steps 1 to 4).

Note