Specifications

Chapter 2 Installation and Setup Installation and Operation Manual
2-6 Connecting the Interfaces Optimux-108 Ver. 6.1
Connecting the V.35 Interface
The Optimux-108 V.35 interface terminates in a 26-pin smart serial connector.
The pin assignment for the V.35 Interface connector (Smart serial) is given in
Appendix A .
³ To connect the V.35 Port:
• Connect the DTE to the V.35 port using the required interface cable according
to the application: ISO 2110, Telebras or M34.
The following interface cables can be ordered from RAD.
Figure 2-9 shows the CBL-AMP-DB25-TLBS interface cable designed to connect
the Optimux-108 Smart serial interface connector to the user equipment DB-25
connector with Telebras pinout.
Figure 2-9. CBL-AMP-DB25-TLBS Cable
Figure
2-10 shows the CBL-AMP-DB25-ISO2110 interface cable designed to
connect the Optimux-108 Smart serial interface connector to the user equipment
DB25 connector with ISO 2110 pinout.
Figure 2-10. CBL-AMP-DB25-ISO2110 Cable
Figure
2-11 shows the CBL-AMP-M34 interface cable designed to connect the
Optimux-108 Smart serial interface connector to the M34 connector of the user
equipment.