Specifications
Chapter  3 Operation  Installation and Operation Manual 
3-8 Configuration and Management Alternatives Optimux-108 Ver. 6.1 
option that displays these keys). The following keys may be used for 
navigation within tables: 
L – move to the left  R – move to the right 
In addition, the following shortcuts are also available: 
  Tab – select the next cell that may be changed 
  S followed by <row number>,<col number> – select a specific cell. For 
example, type S2,5 to select the fifth cell in the second row. 
•  The current value of a parameter is listed within parentheses ( ). To change a 
parameter value on a parameter selection screen: 
  Type the line number corresponding to the desired value, and then press 
<Enter> 
  To enter a value which requires free text entry, type in the desired string 
and then press <Enter>. Use backspace to erase the current string. 
Note that whenever applicable, the allowed range of values of a 
parameter is listed within square brackets [ ]. 
•  The entry is checked after pressing <Enter>, and it is accepted only if it is 
valid: 
  If you make an error, for example, if you press a key not active on the 
current screen or select an invalid parameter value, an ERROR indicator 
appears in the right-hand corner. This indicator disappears as soon as 
you make a correct operation. 
  If you select a parameter value incompatible with the current operating 
state or other parameters, you will see a message that explains the error. 
•  When done with the current screen, press <Esc> to return to the previous 
screen, or type ! to return directly to the main menu. 
Ending a Terminal Configuration Session 
³  To end the current terminal session: 
•  Type &. 
After a session is ended, it is necessary to enter again a valid user name and 
password to start a new session. 
Working with Web Terminal 
Web Browser Requirements 
The following Web browsers can be used to access the Optimux-108 supervision 
utility from any location that enables access to the Optimux-108 using Internet 
protocols. 
•  Internet Explorer 6.0 and up, running on Windows™  
•  Netscape Communicator 7.0 and up, running on Windows™, HPOV or Linux 
•  Firefox 1.0.4 and up, running on Windows™ 










