Specifications

Chapter 4 Configuration Installation and Operation Manual
4-4 Configuring Optimux-108 for Management Optimux-108 Ver. 6.1
Controlling Management Access
You can enable or disable access to the Optimux-108 management system via an
SNMP, Telnet or Web-based application. By disabling SNMP, Telnet or Web, you
prevent unauthorized access to the system when security of the Optimux-108 IP
address has been compromised. When SNMP, Telnet and Web access is disabled,
Optimux-108 can be managed via an ASCII terminal only. In addition, you can limit
access to the device to only the stations defined in the manager list.
Figure 4-4
details management access implementation, depending whether the network
managers are defined or not.
³ To define the management access method:
1. From the Management menu, select Management Access.
The Management Access menu appears (see
Figure 4-4 ).
Optimux-108
Configuration>System>Management>Management Access
1. User Access >
2. Telnet > (All)
3. WEB > (All)
4. SNMP > (All)
>
Please select item <1 to 4>
ESC-Previous menu; !-Main Menu; &-Exit
Figure 4-4. Management Access Menu
2. From the Management Access menu, select Telnet to configure Telnet access,
select SNMP to configure SNMP access, or select WEB to configure Web
access.
3. Define access mode for each management method:
 All (access is allowed for all stations)
 None (access is not allowed)
 Manager Only (access is allowed only for the stations appearing in the
manager list).
Listing Users
The following screen lists information about all users defined in the device.
Optimux-108
. . . >User Info
User Name Access level Dynamic/Permanent
1 USER RO Permanent
2 SU RW Permanent
ESC-Previous menu; !-Main Menu; &-Exit; ?-Help
Figure 4-5. User Information Screen