Specifications

Chapter 4 Configuration Installation and Operation Manual
4-6 Configuring Optimux-108 for Management Optimux-108 Ver. 6.1
Optimux-108
Configuration>System>Control Port>Baud Rate (115200 bps)
1. 9600 bps
2. 19200 bps
3. 38400 bps
4. 57600 bps
5. 115200 bps
ESC-prev.menu; !-main menu; &-exit 1 Mngr/s
Figure 4-7. Baud Rate Menu
Configuring Security Timeout
The timeout specifies a time interval after which Optimux-108 automatically
disconnects from the supervisory terminal or Telnet host if no input from the
user is detected. The timeout value can be in the range of 1 to 60 minutes.
³ To configure the security timeout:
• From the Control Port menu (
Figure 4-6 ), select Security Timeout to set it to
OFF or to 10 minutes.
The display is refreshed and a new value appears.
Displaying New Alarms
This option allows you to display new alarms at the bottom of the terminal
screen (Pop Alarms=On). Regardless of the Pop Alarms setting (On or Off), the
alarms are written to the log file.
Configuring the MNG-ETH port
The MNG-ETH port serves for the management of Optimux-108 via Telnet,
ConfiguRAD, RADview or other SNMP management software.
³ To configure the MNG-ETH port:
1. From the Configuration menu select Physical Layer>Ethernet.
The Ethernet menu is displayed.