Specifications

Installation and Operation Manual Chapter 4 Configuration
Optimux-108 Ver. 6.1 Performing Additional Tasks 4-17
Parameter Description
PS B Status The state of Power Supply B:
• OK
• Fault
• Not mounted (in case only one PS has been ordered – PS A)
Alarm Indication Current system status:
• Normal - System is functioning normally; no alarms activated
• Major - One or more major alarms are currently activated
• Minor - One or more minor alarms are currently activated
Test Indication Indicates whether any tests are currently active in the device:
• ON - Tests are currently active in the device
• OFF - No tests are currently running
³ To set the device to monitor:
• From the Status menu, Enter 1.
The Device Number toggles between Local and Remote, to indicate the
device currently being monitored.
Monitoring the Interface Status of the System
The Interface Status Screen displays the current status of the local and remote
interfaces.
Optimux-108
Monitoring>System>Interface Status
Description Type Operation Speed
1 Loc uplink A Proprietary Up 101904000
2 Loc uplink B Proprietary Down 101904000
3 Loc Ch-1 E1 Up 2048000
4 Loc Ch-2 E1 Up 2048000
5 Loc Ch-3 E1 Up 2048000
6 Loc Ch-4 E1 Up 2048000
7 Loc MNG-ETH ETH Up 100000000
8 Loc V.35 V.35 Down 204800
ESC-Previous menu; !-Main Menu; &-Exit;?-Help 1 User(s)
Figure 4-21. Remote System Status Screen (Optimux-108 with V.35 User Port)