Specifications

Chapter 4 Configuration Installation and Operation Manual
4-18 Performing Additional Tasks Optimux-108 Ver. 6.1
Optimux-108
Monitoring>System>Interface Status
Description Type Operation Speed
1 Loc uplink A Proprietary Up 135168000
2 Loc uplink B Proprietary Down 135168000
3 Loc Ch-1 E1 Up 2048000
4 Loc Ch-2 E1 Up 2048000
5 Loc Ch-3 E1 Up 2048000
6 Loc Ch-4 E1 Up 2048000
7 Loc MNG-ETH ETH Up 100000000
8 Loc USER-ETH ETH UP 100000000
>
ESC-Previous menu; !-Main Menu; &-Exit; ?-Help 1 User(s)
Figure 4-22. Remote System Status Screen (Optimux-108 with Ethernet User
Port)
Monitoring the Physical Ports
You can monitor the status of the following physical ports on the Optimux-108:
• Uplink
• E1 tributary ports
• V.35 serial port
• User Ethernet port
• Management Ethernet port.
Ethernet Ports
The Ethernet Status Screen displays the current status of the Management and
User Ethernet ports.
For a device with V.35 user port, only Ethernet Management port information is
relevant.
To display the status of the Ethernet ports:
1. From the Monitoring menu, select Physical Layer> Ethernet.
The Ethernet management port screen is displayed.
Note