Specifications

Chapter 4 Configuration Installation and Operation Manual
4-20 Performing Additional Tasks Optimux-108 Ver. 6.1
Table 4-8. Uplink Status Parameters
Parameter Possible Values Description
Device Number Local
Remote
Identifies the device currently
being monitored.
Port Number LINK A or LINK B Identifies the uplink currently
being monitored.
Operation Up
Down
Indicates the current
operational status of the
device.
Alarm Indication Normal
Signal loss
Indicates the highest status
level of current alarms.
Test Indication On
Off
Indicates whether a loopback
test is currently being run.
Alarm Masked
Unmasked
Identifies whether alarms on
the device are masked or not.
When masked, Ethernet alarms
are not trapped.
³ To monitor the status of the uplink:
1. To toggle between the local and remote device, enter 1.
The Device Number changes to identify the unit currently being
monitored.
2. To toggle between LINK A and LINK B, enter 2.
The screen displays the current status of the selected port on the
selected device.
E1 Tributary Ports
Optimux-108
Monitoring>Physical Layer>E1
1. Device Number > (Local)
2. Port Number [1-4] > (1)
Operation > (Down)
Alarm Indication > (Signal loss)
Test Indication > (Off)
Alarm > (Unmasked)
>
Please select item <1 to 2>
ESC-Previous menu; !-Main Menu; &-Exit 1 User(s)
Figure 4-26. E1 Port Status Screen
The E1 port parameters are the same as those in the Uplink Status Screen. For
more information, see
Figure 4-25 .