Specifications

Installation and Operation Manual Chapter 5 Monitoring and Diagnostics
Optimux-108 Ver. 6.1 Monitoring Performance 5-5
Optimux-108
Monitoring>Physical Layer>Ethernet
1. Port number > (MNG-ETH)
Operation > (Up)
Auto negotiation Status > (Completed)
Speed & Duplex > (100Mbps Full Duplex)
Alarm > (Unmasked)
>
Please select item <1 to 1>
ESC-Previous menu; !-Main Menu; &-Exit 1 User(s)
Figure 5-4. MNG-ETH Status Screen
Table
5-3. MNG-ETH Status Parameters
Parameter Possible Values Description
Operation Up
Down
Indicates the current operational
status of the device.
Autonegotiation Status Completed Indicates the current status of
autonegotiation.
Speed & Duplex 100Mbps Full Duplex
100Mbps Half Duplex
10Mbps Full Duplex
10Mbps Half Duplex
Indicates the speed and duplexity
configured for the Ethernet port.
Alarm Masked
Unmasked
Identifies whether alarms on the
device are masked or not. When
masked, Ethernet alarms are not
trapped.
3. To see the ETH-USER status, select 2.
4. Select ETH-USER port (2).
The USER-ETH screen is displayed.
Optimux-108
Monitoring>Physical Layer>Ethernet
1. Port number > (USER-ETH)
Administrative status > (Up)
Operation > (Up)
Auto negotiation Status > (Completed)
Speed & Duplex > (100Mbps Full Duplex)
Alarm > (Unmasked)
Please select item <1 to 1>
ESC-Previous menu; !-Main Menu; &-Exit
Figure 5-5. USER-ETH Status Screen