Specifications

Installation and Operation Manual Chapter 5 Monitoring and Diagnostics
Optimux-108 Ver. 6.1 Monitoring Performance 5-7
Parameter Possible Values Description
Alarm Indication Normal
Signal loss
Indicates the highest status
level of current alarms.
Test Indication On
Off
Indicates whether a loopback
test is currently being run.
Alarm Masked
Unmasked
Identifies whether alarms on
the device are masked or not.
When masked, Ethernet alarms
are not trapped.
³ To monitor the status of the uplink:
1. To toggle between the local and remote device, enter 1.
The Device Number changes to identify the unit currently being
monitored.
2. To toggle between LINK A and LINK B, enter 2.
The screen displays the current status of the selected port on the
selected device.
Monitoring the Status of the E1 Port
Optimux-108
Monitoring>Physical Layer>E1
1. Device Number > (Local)
2. Port Number [1..4] > (1)
Operation > (Down)
Alarm Indication > (Signal loss)
Test Indication > (Off)
Alarm > (Unmasked)
>
Please select item <1 to 2>
ESC-Previous menu; !-Main Menu; &-Exit 1 User(s)
Figure 5-7. E1 Port Status Screen
The E1 port parameters are the same as those in the Uplink Status Screen. For
more information, see
Figure 5-6 .
³ To monitor the status of the E1 port:
1. To toggle between the local and remote device, enter 1.
The Device Number changes to identify the unit currently being
monitored (Local or Remote).
2. To select a E1 port to monitor, enter 2 and then the port number (1 to 4).
The screen displays the current status of the selected port on the
selected device.