Specifications

ManualsBrandsRAD Data comm ManualsComputer equipmentOptimux-34

T D M A C C E S S ( M A P )

RAD Data Communications 2009 Catalog

While many vendors are terminating their legacy

multiservice TDM products, RAD Data

Communications continues to offer carriers, telecom

operators and service providers a winning TDM

service deployment strategy. This enables them to

speed their return on investment in access network

equipment and Local Loop plant, as well as to

facilitate the rollout of a variety of new services.

Most importantly, carriers can quickly generate

income without incurring substantial infrastructure

costs, while assuring migration to next-generation

networks.

RAD’s TDM Multiservice Access Platform (MAP) is based

on deploying specialized equipment at the customer

premises, in the Local Loop and at the carrier’s

point-of-presence (POP). The MAP product family includes

the FCD range of dedicated multiservice network

termination units as well as the Megaplex line of

multiservice access multiplexers (TDM, IP and Frame

Relay) and the DXC series of multiservice access nodes.

All products offer built-in Last Mile solutions, such as

IDSL, SHDSL and fiber optics. The Kilomux integrating

multiplexer complements the MAP family, addressing

bandwidth-constrained applications in the transportation,

utility and government markets.

The DXC family of modular multiservice-access nodes

provides non-blocking DS0 cross connect for up to 688

E1/T1 lines. Most of the DXC units support built-in Local

Loop solutions. The DXC devices are the most compact

and high density cross connects of their kind. Plug-in

interface modules supporting n x 56/64 kbps, ISDN U, E1

or T1 transmission with built-in IDSL, SHDSL and fiber

optic modems, E3/T3, STM-1/OC-3 are available. Inverse

multiplexing capabilities for up to eight E1/T1 lines

support high speed data, native LAN connectivity and

video streaming applications.

The FCD-155E and FCD-155 offer STM-1 ADM or terminal

capabilities. They provide a robust and resilient alternative

to access network extension in the carrier environment,

offering bandwidth-efficient provisioning of Ethernet

services on top of traditional TDM interfaces. It is a quick,

cost-effective alternative for service deployment for

utilities and transportation authorities.

RAD’s Megaplex family of multiservice access

multiplexers offers a wide range of data, LAN and voice

services. The devices come with a wide variety of analog

and digital voice connections – PCM, ADPCM, G.723.1, BRI

ISDN, and digital E1/T1 interfaces. These include tail-end

modems and up to 80 E1/T1 lines for distributing

different services over the same infrastructure and

splitting these services at the POP. They also include

built-in fiber optic and five SHDSL and SHDSL.bis main

trunk modems. The Megaplex-4100 offers a future proof

migration path to Ethernet. It serves as a central solution

for Ethernet access devices as well as for TDM CPEs. It

also combines STM-1/OC-3 capabilities with DS0 cross

connect.

The FCD family of compact, low cost, multiservice

network termination units (NTUs) extends the E1/T1

network to the customer premises, enabling carriers and

service providers to create a flexible, service independent

access model while offering a competitive and wide

service portfolio.

Finally, RAD’s Optimux fiber multiplexers enable easy

Ethernet and PDH extension over fiber links or service

port fan-out off large capacity switches and ADMs for

improved access deployment flexibility. Ranging from a

few E1/T1s with or without Ethernet up to STM-1/OC-3

capacity, they offer a solution for every service extension

scenario.

RAD’s Kilomux is a subrate multiplexer for data, voice,

fax, and LAN. It integrates a variety of traffic types over

leased lines, ISDN, IP, and fractional E1/T1, over copper or

fiber, at rates of 9.6 kbps to 1,536 kbps.

Combining award-winning, high quality voice compression

techniques with maximum bandwidth utilization and a

wide range of network and user interfaces, the Kilomux

provides reliable point-to-point and drop-and-insert data/

voice integration solutions at an affordable price,

particularly attractive to the transportation, utilities and

governmental markets.

TDM Access

(Multiservice Access Platform)

Summary of content (44 pages)

PAGE 1
TDM Access 3 TDM Access (MAP) (Multiservice Access Platform) While many vendors are terminating their legacy multiservice TDM products, RAD Data Communications continues to offer carriers, telecom operators and service providers a winning TDM service deployment strategy. This enables them to speed their return on investment in access network equipment and Local Loop plant, as well as to facilitate the rollout of a variety of new services.
PAGE 2
3 E1/T1 TDM PBX Optimux-45 Router T3 Access ADM n x 64 kbps E1s ADM STM-1/OC-3 STM-4/OC-12 Backbone E3/T3 STM-1 SHDSL ASMi-52 FCD-155E ASMi-52 GbE Router Megaplex-4100 4 x E1 SHDSL.bis E1/T1 SHDSL E1/T1 Fiber optic Megaplex ASMi-54 FCD-IP FCD-E1 Ethernet HSSI (up to 16 Mbps) Router Multiservice access node E1/T1 SHDSL PBX STM-1/OC-3 Megaplex-4100 SHDSL DXC n x E1 CC Sub-E1 Sub-E1 X.21 E1/T1 E1/T1 FCD-E1/ FCD-T1 ISDN S0 FCD-E1M X.
PAGE 3
megaplex-4100 m ulti pl ex ers Next-Generation Multiservice Access Node • transports voice, data and advanced ethernet services over pDH/sDH/sONet networks • stm-1/OC-3 next-generation standard ADm or terminal • 4/1/0 non-blocking cross connect of up to 1.
PAGE 4
FE1/FT1/ SHDSL STM-1 CPE DXC-30 E1/T1 Megaplex-2100/ Megaplex-2104 CPE PBX IP/MPLS Network E1/T1 POP Megaplex-104/ Megaplex-204 CPE CPE SHDSL.
PAGE 5
Megaplex-4100 m ulti pl ex ers (Continued) SDH/ SONET CPE STM-1/OC-3 Central Site Megaplex-4100 Megaplex-4100 STM-1/ OC-3 Megaplex-4100 GbE IP E1/T1 FCD-155E SDH/SONET Ring CPE PSTN E1/T1 FCD-155E E1/T1 Megaplex-4100 POP SHDSL E1/T1 STM-1 DXC-10A/ DXC-30 Powerful access node with carrier-class service provisioning features CL.1 modules Supported I/O modules The CL modules function as common logic, cross connect and broadband link modules.
PAGE 6
FE Cisco router SHDSL.
PAGE 7
megaplex-2100, megaplex-2104 m ulti pl ex ers Multiservice Access Multiplexers • integrated access platform for traffic grooming and cross connect • Highly flexible modular multiplexer • supports multiple e1/t1 links • ip main link (tDmoip support) • rFer – resilient Fast ethernet ring with protection • supports e1/t1 ring protection topology • supports Omnibus for teleconference • teleprotection for power utilities • pstN, isDN and data services • r2-CAs support (transparent DtmF/ dec
PAGE 8
Megaplex RADview station Site Extension Video cameras Video cameras 10BaseT Video Surveillance Control Room Video cameras E1/T1 or RFER Ring Megaplex Megaplex Video cameras Video control station VID extension unit m ulti pl ex ers Network Management Control Room Video Monitoring Room PBX Megaplex LAN Video MON station Ring application with video surveillance Redundancy options The optional redundancy on common logic, main link and power supply ensures a high level of system reliability o
PAGE 9
Megaplex-2100, Megaplex-2104 (Continued) m ulti pl ex ers Site D PC Site A Site B Megaplex-2100 Site C Megaplex-2100 Megaplex-2100 10/100 Mbps IP Network 10/100 Mbps 10/100BT 10/100BT Fax PBX Server PC Server PC PC Megaplex-2100 Ethernet daisy chain Alarms Main link modules Alarm information is stored in the common logic module and is automatically read by the management system from any node.
PAGE 10
Fiber/ Copper Station #2 Megaplex Station #n Megaplex Station #2 Megaplex Station #n Megaplex Central Station Line #1 Fiber/ Copper POP Line #n Megaplex Fiber/ Copper Data info Station #1 Megaplex Fiber/ Copper m ulti pl ex ers Line #1 Station #1 Megaplex Display board Line #n Party-line (Omnibus) dedicated voice application Modular chassis The Megaplex family consists of the 4U-high Megaplex-2100 with 12 slots and the 2U-high Megaplex-2104 chassis with five slots − for both I/O and main l
PAGE 11
Megaplex-2100, Megaplex-2104 m ulti pl ex ers (Continued) Control Center Topology can be point-to-point, point-to-multipoint, daisy chain, E1/T1 ring or RFER Megaplex-2100 Station Station Megaplex-2104 Station Megaplex-2104 Megaplex-2104 4-wire data, voice, video over IP ETH ETH ETH 37 9 4 37 9 4 37 9 4 Telemetry Telemetry Telemetry Multiple services for railway in a variety of topologies Remote Site SHDSL ADM E1/T1s SDH/SONET ADM ADM ADM SHDSL S-RPT E1/T1 ASMi-52 PBX Remote Sit
PAGE 12
Computer High speed data Workstation Digital services Handset PBX ISDN Voice/fax analog Fax Main Link Time Division Mux Technology E1/T1 Drop-and-Insert and Bypass E1/T1 SDH/ SONET Cross Connect E1/T1 Megaplex-2100 Stat Mux Terminal Modem SDM mux V.
PAGE 13
megaplex-104, megaplex-204 m ulti pl ex ers Compact Voice Channel Banks • Cost-effective channel banks for small applications • plug-and-play • pCm-encoded Fxs analog voice channels megaplex-104: eight channels megaplex-204: 16 channels • single e1 uplink • soft rx/tx gain control • pCm encoded, A-law or µ-law • each Fxs port supports loop-start, soft gain level setting, polarity reversal, metering, enhanced line tests • enhanced diagnostics per channel • Caller iD-enabled • support fo
PAGE 14
prBm-20 Signaling Monitoring Probe Service providers use the data from the signaling timeslots to monitor the quality of the connection and to detect network faults. PRBm-20 cost-effectively transports signaling information, enabling the service provider to assure quality of service (QoS) at a competitive price.
PAGE 15
DxC Family C rOss C ONNeC ts Multiservice Access Nodes • Ds0 non-blocking cross connect and groomer • Broadcast capabilities (point-tomultipoint) • Compact 1u or 3u-high enclosure • modular construction with four, five or 15 i/O slots • services supported: n x 56/64 kbps, isDN, iDsl, sHDsl, e1, t1, e3, t3, and stm-1 • Optional system redundancy • Optional link and/or hardware protection • integrated fiber optic, sHDsl and iDsl modems • Built-in e1/t1 converter, including A-law/µ-law and
PAGE 16
ADM E1 DXC-30 E1 STM-1 DXC-8R ASMi-52 Up to 96 x SHDSL ASMi-52 Up to 32 x SHDSL E3 DXC-10A ADM E1 ASMi-52L SDH ADM V.35 E1 conn e c t s RADview cro ss Remote Sites Central Site V.35 ASMi-52L Extending services over DSL E1/T1 BTS E1/T1 DXC Modem Fiber optic Modem Switch DXC RADview NMS Main link line protection by different media types Basic units DXC-4 The compact half 19-inch, 1U-high unit grooms timeslots from four or eight E1/T1 links to a single E1/T1 uplink.
PAGE 17
DXC Family c ro ss conn e c t s (Continued) Modules E1 modules xDSL modules Most modules listed on this page are supported by all DXC chassis. A variety of port densities are available, from single-port to eight-port modules. Most modules support hardware and/or line redundancy and ensure a protective switching time of under 50 msec. D4E1/D8E1 four-port or eight-port interface modules transmit to a range of 2.2 km (1.4 miles) by using the built-in LTU. They have a data rate of up to 2.
PAGE 18
Target markets • • • • • • • • Splitting data and voice traffic Distributing services from an SDH or other network to a wide variety of end users by creating an E1/T1 or STM-1 daisy chain Grooming fractional trunks to full trunks Maximizing data traffic payload over E3, T3 or STM-1 trunks Grooming of monitoring signals (SS7 or other) for advanced services and quality of service Broadcasting identical data to multiple destinations Cross connecting trunks at the point-of presence (POP) Grooming a variet
PAGE 19
DxC-100 C rOss C ONNeC ts Multiservice Access Node • Carrier-class 4/3/1/0 non-blocking cross connect • 256 mbps to 1.2 Gbps matrix • expandable (stackable) 6u-high unit • modular construction with 11 to 86 i/O slots • services supported: n x 56/64 kbps, e1, t1, e3, t3 (including G.
PAGE 20
BERT and loopback diagnostics. Optional 1:n redundancy. D8E1T1 supports eight T1 (100 ohm) or E1 (120 ohm) balanced interfaces in any combination. D4, ESF or G.70x framing and AMI, B8ZS or HDB3 line coding plus integral BERT and loopback diagnostics. E1/T1 voice encoding and signaling bit conversion included. Optional 1:n redundancy.
PAGE 21
DxC-4 C rOss C ONNeC ts Fractional E1/T1 Groomer • Grooms fractional links onto one e1/t1 link • Four or eight e1/t1 ports • simple installation and operation • Compact, half 19-inch solution • sNmp management For latest updates visit www.rad.com The DXC-4 fractional E1/T1 groomer offers reliable E1/T1 grooming of TDM traffic for up to eight fractional E1/T1 lines onto a single E1/T1 link, saving costs on leased lines and offering quick payback.
PAGE 22
FCD-e1m, FCD-t1m Modular E1/T1 or Fractional E1/T1 Access Units Supporting Megaplex-2100 Modules The FCD-E1M can be ordered with an internal LTU (line termination unit), allowing direct connection to the E1 network, or can connect via an external LTU. The FCD-T1M has an integral CSU, for direct connection to the T1 network. Optionally, either unit can support a fiber optic main link interface for multimode or single mode fiber, eliminating the need for an external fiber optic modem.
PAGE 23
FCD-e1l, FCD-t1l, FCD-e1lC, FCD-t1lC tD m Ntus E1/T1 or Fractional E1/T1 Managed Access Units • single or dual port access to e1/t1 or fractional e1/t1 services • sNmp agent • Out-of-band management via V.24 supervisory port • selectable sync data rates, n x 64 kbps or unframed e1/t1 • Data interfaces: V.35, rs-530, V.36/rs-449, x.21, V.24 • integrated ethernet bridge, 10/100Baset VlAN bridge or 10Baset router options • e1 interface complies with itu G.703, G.704, G.706, G.732, G.
PAGE 24
FCD-e1, FCD-t1, FCD-e1A E1/T1 or Fractional E1/T1 Access Units The FCD-E1 is available with or without an internal LTU (line termination unit), allowing direct connection to the E1 network or connection via an external LTU. In the FCD-E1A this capability is built-in and can be configured with or without LTU by the customer. The FCD-T1 has a built-in CSU, allowing direct connection to the T1 network.
PAGE 25
FCD-ipm E1/T1 or Fractional E1/T1 Modular Access Device with Integrated Router Ntus tD m modular integrated access device (iAD) for providing bundled services (telephony and internet access) over e1/t1 lines • • e1/t1 access over copper (e1 only) or fiber • One or two independent ethernet ports • Optional integrated four-port switch • support for Frame relay (rFC 1490) and ppp protocols • OspF support • Data interfaces: V.35, rs-530, V.36/rs-449, V.24, x.
PAGE 26
FCD-ipl E1 and Fractional E1 Access Unit with Integrated IP Router Qos differentiation for Voip, video and data The FCD-IPL transports Ethernet traffic at wire speed, enabling full use of the 2 Mbps link. The IEEE 802.3-compliant 10/100BaseT user port supports auto-negotiation and operates in both full and half duplex modes.
PAGE 27
FCD-ipD tD m Ntus Dual E1 Router • Dual e1 router specially adapted for out-of-band ADm management over sDH or ip chain applications • single 10/100Baset lAN interface or an integrated four-port switch • enables shared e1/fractional e1 bandwidth over sDH or other e1 rings The FCD-IPD is a dual E1 main link router, enabling shared E1 bandwidth over SDH or other E1 rings. The FCD-IPD is especially suited for management applications in SDH environments.
PAGE 28
FCD-ip E1/T1 or Fractional E1/T1 Access Unit with Integrated Router integrated router The integrated router supports: • IP/IPX routing and transparent bridging • Backup router link capability • Quick setup and configuration • Solid Firewall™ (session-based) protection • NAT and Single IP address translation • PAP/CHAP security • OSPF, RIP-1, RIP-2 • e1/t1 access over copper or fiber • One or two independent ethernet ports or an integrated four-port switch (10/100Baset) • ip/ipx routing and transparen
PAGE 29
FCD-2l tD m Ntus E1 or Fractional E1 Access Unit • single port access to e1 or fractional e1 services • Optional built-in ltu • selectable sync data rates: n x 56 kbps, n x 64 kbps • Data interfaces: V.35, rs-530, V.36/rs-422, x.21 • integrated ethernet bridge option • e1 interface complies with itu G.703, G.704, G.706, G.732, and G.823 • main link diagnostics include loopbacks, Ber test and data port monitoring • Dte2 support For latest updates visit www.rad.
PAGE 30
FCD-e1e Managed E1 and Fractional E1 Access Unit The integral LTU ensures a range of up to 2 km (1.2 miles) and is software selectable. The unit can be programmed to assign data automatically from the data port into consecutive timeslots or the user can assign timeslots manually. multiple clock source selection Multiple clock source selection ensures maximum flexibility. Timing for the E1 main link and sublink may come from the recovered receive clock, an internal oscillator or the data port.
PAGE 31
Optimux-108, Optimux-106 F i B e r m ulti pl ex ers Four E1 or T1 and Ethernet or Data over Fiber Multiplexers • redundancy options Optimux-108 multiplexer for e1 channels and ethernet or data (V.35) over a single link • Optimux-106 multiplexer for t1 channels and ethernet over a single link • Optional redundant wide range power supply • multimode or single mode fiber • single mode over single fiber or WDm • range up to 120 km (74.
PAGE 32
Up to 24 Buildings Head Office fi b er Building C Building B Building A NMS m ulti pl e x e rs ETH Internet ETH Router Router Fiber Optimux-106/ Optimux-108 LRS-102/ Megaplex-4100 TDM Network PBX 4 x E1/T1 4 x E1/T1 PBX Ethernet, voice, data, and video services over fiber optic link CPE SHDSL.bis IP/MPLS Network POP ASMi-54 GbE STM-1/OC-3 CPE PBX Megaplex-4100 SDH/SONET FO Optimux-106/ Optimux-108 E1/T1 Ethernet aggregation over fiber or copper and ring CPE POP FE SHDSL.
PAGE 33
Optimux-45, Optimux-45L f i b e r m ulti pl ex ers 21 E1 or 28 T1 over T3 or Fiber Multiplexers • Multiplexes up to 21 E1 or 28 T1 channels over a single T3 (45 Mbps) or fiber link • Optimux-45 and Optimux-45L are manageable multiplexers that provide a highly cost-effective and simple solution for transporting multiple E1 and T1 links, as well as a combination of E1 and T1 (according to ITU G.747), over a standard T3 electrical signal or fiber link.
PAGE 34
Optimux-45 back panel F i B er Wireless Network E1 E1 T3 coax Optimux-45 Optimux-45 Wireless Network m ulti pl e x e rs T1 T3 coax T1 Wireless Network E1 T3 coax Optimux-45 T1 point-to-point over wireless links BSC 28 T1 or Optimux-45 21 E1 Optimux-45 E1/T1 Optimux-45 E1/T1 Optimux-45 Optimux-45 BSC E1/T1 E1/T1 NMS BTS BTS BTS Drop-and-insert for cellular infrastructure T3 coax E1 T1 Optimux-45L SDH/SONET Backbone ADM E1 Fiber ADM FOM-T3 110 km Optimux-45L T1 point-
PAGE 35
Optimux-34, Optimux-25 f i b e r m ulti pl ex ers 16 E1 or T1, Ethernet or Data over E3 or Fiber Multiplexers • Multiplexes up to 16 E1 or T1 channels and high speed data (V.35), or optional Ethernet traffic over a 34/25 Mbps link • 10/100BaseT Ethernet • E3 (Optimux-34) or fiber optic cable • Multimode • Single or single mode fiber mode over single fiber or WDM • Conforms to ITU G.703, G.742, G.751, G.823, G.824, G.955, IEEE 802.
PAGE 36
��
PAGE 37
Optimux-1551, Optimux-1553 Optimux-1551 s D H / s O N e t m ulti pl ex ers STM-1/OC-3 Terminal Multiplexers • sDH/sONet terminal multiplexers connect lower rate pDH services over a single stm-1/OC-3 (155 mbps) link • Optimux-1551 multiplexes up to 63 e1 or 84 t1 tributary channels • Optimux-1553 multiplexes three e3 or three t3 tributary channels • Channelized stm-1/OC-3 main link with standard fiber optic (single mode, multimode and WDm) or coaxial interface Optimux-1551 and Optimux-1553 termi
PAGE 38
Optimux-1553 n x E1/ n x T1 LAN ETH RICi-8E1/ RICi-8T1 IP DSLAM Central Site Egate-100 SDH/SONET Network Optimux-1551 LAN n x E1/ n x T1 ETH RICi-4E1/ RICi-4T1 MPLS Network m u lt i p l e x e rs E1s/ T1s STM-1/ OC-3 GbE Internet Wi-Fi LAN ETH E1/T1 RICi-E1 RICi-T1 Internet traffic s D H / s ONet Remote Sites ISP end-to-end ethernet over sDH/sONet/pDH Up to 63 E1 or 84 T1 Router Router Optimux-1551 ADM Router Fiber optic STM-1/OC-3 ADM IP Network STM-1/OC-3 Router Router ADM S
PAGE 39
FCD-155 A D m s • standard next-generation stm-1/OC-3 terminal • Grooms ethernet and e1/t1/e3/t3 traffic over stm-1/OC-3 fiber or copper links s D H / s ONet STM-1/OC-3 Terminal Multiplexer • multiservice functionality in the same box: – two or six 10/100Baset ports or one Gbe port – Four or eight e1/t1 ports or one e3/Ds3 port • sFp-based uplinks and Gigabit ethernet • Advanced management option including DCC and ip tunneling • Available with standard protection on the main link • Compact
PAGE 40
FCD-155e Ethernet and E1/T1, E3/T3 SDH/SONET ADM The FCD-155E connects LAN traffic by creating an SDH/SONET network. Support for generic framing procedure (GFP) or X.86 encapsulation with virtual concatenation enables configuring the bandwidth of the IP channel in increments of 2 Mbps (VC-12), 1.5 Mbps (VT 1.5) or 50 Mbps (VC-3 or STS-1), up to 100 Mbps wirespeed, for cost-effective adaptation of SDH/SONET infrastructure for LAN connectivity.
PAGE 41
imxi-4 i N V e rs e m ulti pl ex er Managed Inverse Multiplexer • Connects a high speed switch or router channel over up to four sHDsl or e1/t1 links; throughput up to 8.3 mbps • user-selectable bridge or router modes • employs VlAN tagging and stacking for providing transparent lAN services (tls) • 10/100Baset ethernet user port For latest updates visit www.rad.com The IMXi-4 inverse multiplexer splits a single high speed channel of up to 8.
PAGE 42
Kilomux-2100, Kilomux-2104 Subrate Multiservice Multiplexers • link data rates from 9.6 kbps to 1,536 kbps Kml.10 built-in ISDN terminal adapter for one or two “B” channels; supports dedicated or switched connection • High quality, low bit rate voice/fax from 4.8 kbps to 14.4 kbps • two chassis types: – Kilomux-2100 with 12 i/O slots – Kilomux-2104 with four i/O slots • Optional redundant power supply and link interface • KCl.
PAGE 43
Kilomux-2100, Kilomux-2104 (Continued) s u b rat e M U L T I SER V I C E M U L T I P L E X ERS Data modules KLS.1/N Low speed module supports two sync or async RS-232/V.24 data channels. Selectable data rates from 300 bps to 64 kbps. KLS.2 Statistical multiplexing data module supports four async RS-232/V.24 channels. Selectable data rates from 300 bps to 19.2 kbps. KHS.1 High speed module supports two sync data channels with V.35, RS-449/RS-422 or X.21 interface.
PAGE 44
Internetworking modules KMBE Ethernet IP/IPX router/bridge module supports the connection of up to 256 remote workstations to a main Ethernet LAN in bridge mode, and to an unlimited number of workstations in router mode. Bandwidth from 9.6 kbps to 1,280 kbps is supported on the link. Interface can be AUI, thin coax or UTP (10BaseT). The module includes all the features of the WEB RANger-II such as Single IP, Solid Firewall™ and RADview SNMP management.