Specifications

Installation and Operation Manual Chapter 1 Introduction
Optimux-34 Ver. 2.81 Overview 1-3
Figure 1-1. Optimux-34 Point-to-Point Link Application
Backbone Data Network Application
In the application shown in Figure 1-2 , a coax link module is installed in the
Optimux-34 unit that is physically close to the public network. The other
Optimux-34 is equipped with a fiber optic link interface to extend its transmission
range. The optical link is connected to a fiber optic modem (FOM) with an E3
interface, which is coupled to the public network via a coaxial cable.
Figure 1-2. Optimux-34 Backbone Access Application
Wireless Link Application
A wireless link application shown in Figure 1-3 is a wireless link connecting two
Optimux-34 units. The Optimux-34 unit can be connected to a Megaplex-2100
unit and a network management service (NMS). A coax link module is installed in
each of the Optimux-34 unit that is physically close to the wireless device.
Figure 1-3. Wireless Link Connecting Optimux-34 Units