Specifications

Installation and Operation Manual Chapter 1 Introduction
Optimux-34 Ver. 2.81 Technical Specifications 1-9
Figure 1-8. External and Loopback Timing
Power Requirements
Optimux-34 has a hot-swappable, wide range, universal power supply for AC and
DC options.
A second power supply is optionally installed in the Optimux-34 to assure
continuous operation in case of supply failure. When the two supplies are turned
ON, they share the power consumption of the unit. If one of the power supplies
fails, the other provides the full power consumption.
1.4 Technical Specifications
Electrical Link
Interface (E3)
Electrical Interface According to ITU-T Rec. G.751
Jitter According to ITU-T Rec. G.823
Data Rate 34,368 kbps
Line Code HDB3
Impedance 75Ω unbalanced
Range According to ITU-T Rec. G.703
Connectors (2) SMB-BNC
Redundancy Additional electrical link is optional