Specifications

Chapter 1 Introduction Installation and Operation Manual
1-10 Technical Specifications Optimux-34 Ver. 2.81
Fiber Optic Link
Interface
Applicable Standard ITU-T Rec. G.652
Line Code CDP
Performance Refer to Table 1-1
Connectors • SFP interfaces with LC connectors
• SFP interface with SC/APC for single
wavelength single fiber interface options, see
Table 1-1 .
Redundancy Additional fiber optic link is optional
E1Channel
Interface
Electrical Interface According to ITU-T Rec. G.703
Jitter According to ITU-T Rec. G.823
Data Rate 2,048 kbps
Line Code HDB3
Range According to ITU-T G.703
Ports 16 E1 ports
Port Type Balanced (120Ω), RJ-45
Unbalanced (75Ω), BNC
Note: The 2U box supports unbalanced only.
V.35 Channel
Interface
Data rate 2.048 Mbps
Timing Internal, External and Loopback timing
Connector DB-25
Control Signals RTS, CTS, DTR, DSR and DCD
Management Ports
Physical Interface 10/100BaseT MNG-ETH ports
Data Rate 10/100 Mbps
Transmission Mode • Full/half-duplex
• Autonegotiation enable/disable
• Filter enable/disable
• Flow Control and Backpressure
enable/disable