Specifications

Installation and Operation Manual Chapter 3 Operation
Optimux-34 Ver. 2.81 Configuration and Management Alternatives 3-9
1. After the SW finishes uploading, press Enter a few times.
"..." appears.
2. Press <.> a few times until the following Password Prompt screen appears.
(This synchronizes the baud rate of the terminal to the setup configuration).
Optimux-34
USER NAME: SU
PASSWORD: ****
ESC - clear; & - exit 1 user(s)
Figure 3-3. Password Prompt Screen
It is recommended to change default passwords to prevent unauthorized access
to the unit.
³ To enter as a superuser:
1. Enter su for user name.
2. Enter 1234 for password.
This allows you to configure all the parameters of Optimux-34, and to change the
su and user passwords.
³ To enter as a user:
1. Enter user for user name.
2. Enter 1234 for password.
³ To set all passwords to the default values (1234):
• Log in as su and delete the unit’s configuration through the configuration
screens.
Entering the Terminal Session
Once you have logged into the system, the Optimux-34 main menu is displayed.
Optimux-34
Main Menu
1. Inventory >
2. Configuration >
3. Monitoring >
4. Diagnostics >
5. Utilities >
>
Please select item <1 to 5>
ESC-prev.menu; !-main menu; &-exit 1 user(s)
Figure 3-4. Main Menu
Note