Specifications

Installation and Operation Manual Chapter 4 Configuration
Optimux-34 Ver. 2.81 Configuring Optimux-34 for Operation 4-7
Configuration>System>Management>Managers List
Num IP address Trap
1 0.0.0.0 Unmasked
2 0.0.0.0 Unmasked
| 3 0.0.0.0 Unmasked
v 4 0.0.0.0 Unmasked
5 0.0.0.0 Unmasked
1. Change cell … (0.0.0.0)
>
ESC-prev.menu; !-main menu; &-exit 1 user(s)
Figure 4-7. Managers List Screen
Table
4-6 describes the IP address and the Trap mask fields in the Managers List
menu (see
Figure 4-7 ).
Table 4-6. Managers List Values
Field Description Possible Values Visibility
IP Address The manager’s IP address 0.0.0.0 to
255.255.255.255
Always on
Trap Mask Masks and unmasks traps to the Manager Masked,
Unmasked
Always on but access is
only possible when the
IP address is provided.
2. The list contains 10 entries. Use the Tab key to select next changeable cell.
3. To change the IP value of a cell, select the field (it will appear highlighted),
then choose Change Cell and enter the new IP value.
4. To change the Trap Mask value of a cell, select the field (it will appear
highlighted), then choose <1> for Masked, or <2> for Unmasked.
Management Access
You can enable or disable access to the Optimux-34 management system via
SNMP, Telnet or Web-based applications. By disabling SNMP, Telnet, or Web, you
prevent unauthorized access to the system when security of the Optimux-34 IP
address has been compromised. When SNMP, Telnet and Web access is disabled,
Optimux-34 can be managed via an ASCII terminal only.
³ To configure Management Access parameters:
1. From the Management Menu, choose Management Access.
The Management Access Menu is displayed: