Specifications

Chapter 4 Configuration Installation and Operation Manual
4-8 Configuring Optimux-34 for Operation Optimux-34 Ver. 2.81
Configuration>System>Management>Management Access
1. User Access >
2. TELNET > (All)
3. WEB > (All)
4. SNMP > (All)
>
Please select item <1 to 4>
ESC-prev.menu; !-main menu; &-exit 1 user(s)
Figure 4-8. The Management Access Menu
Table
4-7 describes the Telnet, Web, Web Trace Refresh and SNMP fields in the
Management Access menu (see
Figure 4-8 ).
Table 4-7. Management Access Values
Field Description Possible Values Visibility
Telnet Defines access to Telnet None – access is not permitted
Managers Only – access only from stations
defined in the Managers list
All – for all users
Always
Web Defines access to the Web None – access is not permitted
Managers Only – access only from stations
defined in the Managers list
All – for all users
Alway
SNMP Defines access to SNMP None – access is not permitted
Managers Only – access only from stations
defined in the Managers list
All – for all users
Always
2. Select Telnet for Telnet access by selecting All (default), None, or Managers
Only.
3. Select SNMP for SNMP access by selecting All (default), None, or Managers
Only.
4. Select Web Trace Refresh for Web access by selecting a number from 1-255.
The device allows up to three users (Supervisory Terminal required, and two
additional users; Telnet, SNMP, or WEB).
Configuring the Control Port
The control port is used to connect a console terminal to the Optimux-34 device.
³ To configure the control port:
1. From the System menu, select Control Port.
Note