Specifications

Installation and Operation Manual Chapter 4 Configuration
Optimux-34 Ver. 2.81 Configuring Optimux-34 for Operation 4-15
Configuration>Physical Layer>E3
1. Device Number > (Local)
2. Port Number (LINK A)
3. Port Name ... ()
4. Alarms (Unmasked)
>
Please select item <1 to 4>
ESC-prev.menu; !-main menu; &-exit 1 user(s)
Figure 4-16. E3 Menu
Table
4-12 describes the Local and Remote Uplink menu (see Figure 4-16 ).
Table 4-12. E3 Values
Field Description Possible Values Visibility
Device Number The device number Remote
Local
Always
Port Number E3 port number LINK B
LINK A
Always
Port Name Sets a name for the port containing up to
15 characters.
Alarms Masks UpLink alarms Masked
Unmasked
Always
2. Select Device Number option and set the device to either Local or Remote.
3. Select Port Number to set the E3 port number to either LINK A or LINK B.
4. Select Port Name to set a name for the port.
5. Select Alarms to mask or unmask the Uplink alarms.
Configuring the E1 Port
The E1 option in the Physical Layer menu is for the configuration of the E1 ports.
³ To configure the E1 port:
1. From the Configuration menu, select Physical Layer> E1.
The E1 menu is displayed.