Specifications

Chapter 4 Configuration Installation and Operation Manual
4-22 Performing Additional Tasks Optimux-34 Ver. 2.81
Optimux-34
Inventory
Device type > (Optimux-34)
SW version ... (2.81)
HW version ... (1.00/B Firmware: E1E0 Ver. 2.82)
INTERFACES INFORMATION
E3 Link A ... (OPTICAL)
E3 Link B ... (Module not Installed)
E1 Ports 1-8 ... (RJ-45, Balance (120ohm))
E1 Ports 9-16 ... (RJ-45, Balance (120ohm))
V.35 ... (ISO 2110)
USER-ETH ... (RJ-45, 10/100BaseT)
MNG-ETH ... (RJ-45, 10/100BaseT)
... (N)
>
Please select item <1 to 1>
ESC-prev.menu; !-main menu; &-exit 1 user(s)
Inventory
... (P)
Alarm Port ... (DB-9)
Control Port ... (DB-9, RS-232)
PS A type > (AC/DC)
PS B type > (AC/DC)
1. Device Number > (Remote)
>
Please select item <1 to 1>
ESC-prev.menu; !-main menu; &-exit 1 user(s)
Figure 4-23. Inventory Screen of an Optimux-34 Remote Device
Table
4-15 describes the Device Number field in the Inventory menus (see
Figure 4-22 and Figure 4-23 ).
Table 4-15. Inventory Values
Field Description Possible Values Visibility
Device Number The device number.
Configurable if connected to a remote device
and unconfigurable when Optimux-34 is not
connected to a remote device or when the
remote device is not an Optimux device.
Remote
Local
Always