Specifications

Chapter 5 Monitoring and Diagnostics Installation and Operation Manual
5-2 Monitoring Performance Optimux-34 Ver. 2.81
Monitoring>System>Active Alarms
Source Description Status
1 Local Device PS A FAIL Unmasked
| 2 Local Device Redundancy not available Unmasked
V 3 Local E3 A Signal Loss Unmasked
4 Remote port 5 RX AIS Unmasked
>
ESC-prev.menu; !-main menu; &-exit; ?-help 1 user(s)
Figure 5-2. Active Alarms Screen
Table
5-1 describes the source values in the Active Alarms screen (see Figure 5-2 ).
Table 5-1. Active Alarms Source Values
Field Description
Device For system level alarms
Local E3 # For local device uplink
Remote E3 # For remote device uplink
Local port # For local device E1 port
Remote port # For remote device E1 port
Local USER-ETH For local device USER-ETH port
Remote USER-ETH For remote device USER-ETH port
Local MNG-ETH For local device MNG-ETH port
Remote MNG-ETH For remote device MNG-ETH port
Event Log
³ To view the Event Log:
• From the System menu, select Event Log.
The Event Log menu is displayed.