Specifications

Installation and Operation Manual Chapter 5 Monitoring and Diagnostics
Optimux-34 Ver. 2.81 Monitoring Performance 5-5
Monitoring>Physical Layer>Ethernet
1. Device Number > (Local)
2. Port Number > (MNG-ETH)
Operation > (Up)
Autonegotiation Status > (Complete)
Speed & Duplex Status > (100Base-TX Full Duplex)
Alarms > (Unmasked)
>
Please select item <1 to 2>
ESC-prev.menu; !-main menu; &-exit 1 user(s)
Figure 5-6. Physical Layer Ethernet Screen
2. To see the USER-ETH status, select 2 and then USER-ETH port (2).
3. To see the remote Ethernet status, select 1 and then Remote (2).
Table 5-2. Physical Layer Ethernet Fields
Field Description
Device number Local or remote device information
Port number Ethernet Management or Ethernet User port information
Operation Link up or down
Autonegotiation Auto Negotiation status Complete, Not Complete, or Disable
Speed and Duplex 10Base-T or 100Base-TX and Full Duplex or Half Duplex
Alarms the Alarms to the ETH port status (Masked/Unmasked).
³ To display the status of the E3 port:
• From the Physical Layer menu, select E3.
The E3 screen is displayed.
Monitoring>Physical Layer>E3
1. Device Number > (Local)
2. Port Number > (LINK A)
Operation > (Up)
Alarm Indication > (Normal)
Test Indication > (Off)
Alarms > (Unmasked)
>
Please select item <1 to 2>
ESC-prev.menu; !-main menu; &-exit 1 user(s)
Figure 5-7. Physical Layer E3 Screen
³ To display the status of the E1 port:
• From the Physical Layer menu, select E1.