Specifications

Installation and Operation Manual Chapter 5 Monitoring and Diagnostics
Optimux-34 Ver. 2.81 Detecting Errors 5-7
Optimux-34
Diagnostics
1. Device Number > (Local)
2. E3 Loop Type > (No Loop)
3. E3 LLB Loop timeout(min)[1 – 255] ... (5)
4. Port Loops []>
5. Clear all Port loops
>
Please select item <1 to 5>
ESC-prev.menu; !-main menu; &-exit 1 user(s)
Figure 5-10. Diagnostics Menu
Loop Connections
Optimux-34 supports loop connections necessary for isolating a failure to a
particular component of the transmission system. The loop connections are set
using a management tool connected to one of the management ports of the unit.
The available Optimux-34 loop connections are shown in
Figure 5-11 , and the
diagnostic loops are shown in
Table 5-3 .
Figure 5-11. Optimux-34 Loops