Specifications

Installation and Operation Manual Chapter 6 Software Upgrade
Optimux-34 Ver. 2.81 Upgrading Optimux-34 Software via the File Utilities Menu 6-3
4. Activate the TFTP server application.
5. Download the (OP-34.img) from the PC to Optimux-34.
Configuration values shown in this chapter are examples only.
Verifying the Optimux-34 Host Parameters
The Optimux-34 host must have host IP parameters configured according to your
network requirements. Otherwise you will not be able to establish a proper
communication session with the TFTP server. Refer to the following manual
section for additional information:
•
Connecting to the ASCII Terminal in Chapter 2
•
Working with Terminal in Chapter 3
•
Configuring IP Host Parameters and Configuring the Host Encapsulation in
Chapter 4 .
³ To verify the Optimux-34 host parameters:
• Display the Host IP menu (Configuration>System Configuration>Management
>Host IP), and verify that the host IP address, IP mask and default gateway
are configured according to your network requirements.
Optimux-34
Host IP
Host IP address (172.17.161.73)
Host IP mask (255.255.255.0)
Host default gateway (172.17.161.1)
Read community (public)
Write community (public)
Trap community (public)
>
ESC-prev. menu; !-main menu; &-exit; @-scroll
Figure 6-1. Configuring the Host
Activating the TFTP Server
Once the TFTP server is activated on the PC, it waits for any TFTP file transfer
request originating from the product, and carries out the received request
automatically.
Transferring Software and Configuration Files section in Chapter 4
explains how to prepare your PC for the TFTP file transfer.
³ To run the TFTP server:
• Activate a TFTP server application, such as 3Cdaemon (available from
www.3com.com) or PumpKIN (available from http://kin.klever.net/pumpkin/).
Note